Changing the rubber seal on an Indesit washing machine door

How to change the door seal on an Indesit washing machine: a complete guide

The washing machine door seal, also known as the hatch seal, gasket, or bellows , is a critical component that prevents water leaks and maintains a tight seal. With use, this seal can wear down, crack, or accumulate mold, which can cause leaks, unpleasant odors, or damage to the appliance . If you notice any of these problems, it's time to replace the seal on your Indesit washing machine . It sounds more difficult than it actually is: this time, you can do the repair yourself.

In this step-by-step guide, we explain how to do it easily, without having to call a technician.

When should you change the rubber on your washing machine?

If you notice any of these signs, you may need to replace your door seal:

• Water leaks from the front of the washing machine.
• Bad odors or mold accumulation in the rubber.
• Visible cracks or tears : Occasionally, a zipper or shoelace can tear your door seal.
• Difficulty closing the door properly : the rubber has become deformed over time.

Replacing the rubber seal on time is key to avoiding further damage and extending the life of your Indesit washing machine.

Necessary tools and materials

Don't be in such a hurry! Before you begin, make sure you have:

• A replacement rubber compatible with your Indesit washing machine model.
• A screwdriver (flat and Phillips).
• A clean cloth .
• Silicone lubricant (optional, but useful to facilitate installation).

Steps to change the door seal on an Indesit washing machine

1️⃣ Unplug the Washing Machine

Before handling any parts, unplug the washing machine from the power outlet and turn off the water to avoid accidents.

2️⃣ Remove the old rubber

• Open the washing machine door and locate the rubber seal. It's held in place by a metal or plastic ring .
• Use a screwdriver to pry off the ring (usually easiest from the bottom of the washer hatch) and carefully pull it out.
• Pull the rubber outwards to remove it completely.
• Clean the area with a damp cloth before applying the new rubber.

3️⃣ Install the new rubber

• Start by placing the top of the rubber in the door slot.
• Slowly fit the remaining rubber band into the groove, making sure there are no wrinkles or creases.
• If the rubber is stiff, use silicone lubricant to ease installation.

4️⃣ Secure the rubber band with the metal ring

Once the rubber is securely in place, replace the retaining ring . Make sure it fits snugly and doesn't move.

5️⃣ Check the installation

• Close the washing machine door and check that the rubber seals properly.
• Plug in the washing machine and run a short wash cycle without clothes , keeping an eye out for leaks.

Tips for caring for your door seal

• Clean the rubber regularly with a damp cloth and a solution of bleach or vinegar to prevent mold.
• Leave the door open after each wash to avoid moisture and unpleasant odors.
• Do not use excessive amounts of detergent , as it can cause residue that can damage the rubber, create odors, etc.
• Clean the inside of your washing machine every 6 months with a brand-specific product to prevent dirt buildup.

Conclusion

Replacing the door seal on an Indesit washing machine is a simple process you can do yourself, saving you money on repairs and extending the life of your appliance.

If you need an original or compatible replacement rubber , at Electrotodo we have the ideal replacement for your Indesit washing machine . Shop online quickly and securely. Repair your washing machine easily and continue enjoying its optimal performance! 🚀