Replacing the seal on a Samsung Ecobubble washing machine may seem complicated, but with the right tools, an original replacement part, and this guide, you can do it yourself without needing a service call. This process prevents leaks and unpleasant odors and improves the overall performance of your washing machine.
⚠️ Symptoms of damaged gum
-
Water leaks : damp stains around the door after washing
-
Visible cracks or tears in the rubber, especially on the inside, zippers and snaps, can cut the rubber when turning.
-
Persistent bad odors , mold and residue buildup
-
Presence of shavings or rubber remains inside the drum, a sign of deterioration and wear due to repeated rotation.
-
Noise when the drum turns , due to friction between the rubber and the drum.
🛠️ Common steps for changing the door seal
1. Safety first!
-
Unplug the washing machine to avoid electrical hazards.
-
Turn off the water supply , it could get really messy!
2. Remove the top cover
-
Remove the screws on the back and slide the top cover back, removing it completely .
3. Remove the front panel
-
Remove the detergent cap and loosen the internal screws (if necessary), the top screws, and the bottom screws that secure the front.
-
Carefully unclip the plastic clips and open the panel by sliding it forward.
4. Remove the retaining ring and old rubber
-
Locate the metal spring that holds the rubber to the outer drum. Pry it against the natural direction with a flathead screwdriver or pliers .
-
Remove the old rubber from the drum.
5. Clean and check the drum rim
-
Clean away any dirt, mold, or rubber with a soap solution to ensure a good seal .
-
Make sure the surface is dry before installing the new rubber.
6. Install the new rubber
-
Align the rubber with the drum (seal ledge facing inward), fitting the drain hole into place at the bottom.
-
Press the rubber into the drum with your fingers, making sure it is even .
7. Install the retaining spring
-
Insert the metal spring around the rubber.
-
Stretch it by turning it clockwise until it fits into the outer slot.
-
Use a screwdriver or pliers to help make sure it is seated properly .
8. Reassemble the front
-
Hook the staples and replace all the screws you removed.
-
Reinstall the detergent panel with its screws.
9. Reinstall the top cover
-
Slide it back on and screw the back on.
10. Recalibration (optional)
-
Many Samsung models require recalibration after changing the rubber.
-
Refer to the manual to run the hatch auto-adjustment or calibration cycle (depending on the model) .
11. Check for possible leaks
-
Run a short cycle (cold water) and check for leaks around the door.
🤔 Common problems during replacement
-
Securely fit the hatch and clips : Incorrect installation can cause leaks or the rubber to shift.
-
Removing the front/top cover : depending on the model, you may need to unscrew several parts .
-
Getting the rubber band into place requires precision and sometimes extra help: carefully pull the spring clockwise.
-
Recalibrate the washing machine after the change so that it correctly recognizes the new rubber.
✅ Top tips
-
Uses OEM (original part) replacement : codes such as DC64‑02792A or DC97‑18094B ensure fit and durability .
-
Always disconnect the power before starting.
-
Organize the removed screws , there are different types: write them down or separate them, you have to be organized.
-
Lubricate the rubber surface before applying it with soapy water to facilitate assembly and prevent deformation.
-
When assembling, follow the reverse order of disassembly : it is easier and safer.
-
Install the spring with a tool (flathead screwdriver) and, if possible, ask for help.
-
Rotate the drum manually after changing to check for friction.
👉 Recommended parts and spares at Electrotodo
-
Original Samsung door seal DC64‑02792A – key, OEM part and compatible with Ecobubble 6–10 kg.
-
Samsung DC97‑18094B washing machine door seal – alternative for older 8 kg models.
-
Clamps / springs – are included, but if not, purchase an original replacement.
All these spare parts are available at Electrotodo , with fast shipping and warranty.
🏁 Conclusion
Replacing the rubber seal on your Samsung Ecobubble is a repair you can do at home. All you need are basic tools, an original replacement part, patience, and this step-by-step guide.
The benefits are clear: you'll eliminate leaks and unpleasant odors, and extend the lifespan of your washing machine. And if you buy your spare parts from sites like Electrotodo, you'll ensure quality, compatibility, and professional advice if you have any questions.
