Step-by-step guide to changing the rubber seal on an Electrolux washing machine
The door seal (also called the bellows ) is one of the parts that wears out the most in a washing machine. Over time, mold, cracks, or even tears can develop, causing water leaks and unpleasant odors. If you have an Electrolux washing machine , replacing the seal isn't as complicated as it seems: with a little patience and the right tools, you can do it yourself and save on repairs.
In this Electrotodo guide, we'll show you the general step-by-step process for changing the rubber seal on your Electrolux washing machine.
Necessary tools and materials
- Phillips and flat head screwdriver.
- Needle-nose pliers.
- Mild soap or lubricant (to facilitate assembly).
- A clean rag.
- Original Electrolux door seal (you can find the appropriate reference in our Electrotodo online store by entering your washing machine model in the search engine).
Step by step to change the rubber on an Electrolux washing machine
Step 1: Unplug the washing machine
Friend, your safety comes first! Unplug the washing machine and turn off the water before starting. May the cure not be worse than the disease.
Step 2: Remove the outer clamp
Open the washing machine door and locate the metal ring or clamp that secures the rubber seal to the front. Use a flathead screwdriver or pliers to loosen it, carefully remove it, and fold the rubber seal toward the inside of the drum.
Step 3: Remove the inner clamp
On the innermost part of the rubber, you'll find another clamp that secures it to the drum. Loosen the clamp screw with the screwdriver and remove the old rubber completely.
Tip: Take the opportunity to thoroughly clean the rim of the drum and remove any dirt or limescale. This will help it fit more securely and prevent small leaks that you'll only notice when checking the repair.
Step 4: Install the new Electrolux rubber
You've made sure you've purchased the correct rubber seal by checking the model on the product page (by the way, if you have any questions, you can contact our customer service technicians here ). You've now purchased your Electrolux washing machine rubber seal, at Electrotodo, of course. Place the new rubber seal in the drum groove, making sure to align the factory-installed marks or guides. Replace the inner clamp to secure it securely.
💡 Apply a little liquid soap to the edge of the rubber to make it fit more easily.
Step 5: Mount the rubber on the front
Extend the other end of the rubber toward the front of the washing machine and attach the outer clamp to hold it securely.
Step 6: Review and Test
Before you finish the job, manually rotate the drum to check that the seal is securely in place. Close the door, plug in the washing machine, and run a short wash without clothes to make sure there are no leaks.
Conclusion
Replacing the rubber seal on an Electrolux washing machine is a job you can do at home by following these steps. If your washing machine's rubber seal is damaged, don't wait for it to get worse: avoid water leaks and unpleasant odors with a genuine replacement.
At Electrotodo, you'll find all the original Electrolux washing machine spare parts and many other replacement parts for your washing machine. Just need the exact model of your appliance, and you can buy the replacement part you need in just a few clicks.
👉 Buy your Electrolux washing machine rubber here at Electrotodo
