In this video, Pepe, a repair technician, explains how to repair a Polti steam iron : how to replace the solenoid valve. Pepe provides a detailed explanation of the repair process for a Polti steam iron. The main reason for the repair is the customer's complaint about the constant emission of steam during use of the appliance.

Pepe begins by introducing two possible causes of the problem: a faulty switch/button or a solenoid valve that could be dirty or damaged. He stresses the importance of addressing these issues to restore the ironing centre to its proper functioning.

Step-by-step summary of the Polti ironing centre repair process described by Pepe in the video:

1. Introduction to the Problem:
- The customer complains that the ironing centre emits steam continuously, which is the reason for the repair.

2. Possible Causes of the Problem:
- Pepe mentions two possible causes: a defective push button switch or a dirty or damaged solenoid valve.

3. Disassembling the Ironing Center:
- Remove the water tank and disassemble the iron to access the internal components.

4. Identification of Key Components:
- Highlight important elements such as the boiler, the solenoid valve and the pressure switch during the disassembly process.

5. What is the function of the solenoid valve?:
- Explain the crucial function of the solenoid valve in regulating steam output.

6. Disassembling the Solenoid Valve:
- Use an open-end wrench to remove the solenoid valve, pointing out possible problems such as a dirty plunger or a damaged spring.

7. Cleaning the Solenoid Valve:
- Unscrew and separate specific parts of the solenoid valve to clean it.

8. Identification of Additional Problems:
- Identify and address additional problems, such as the presence of a stone that could be holding the solenoid valve open.

9. Solenoid Valve Assembly:
- Reassemble the cleaned solenoid valve and perform tests to ensure proper operation.

10. Spare Parts Purchase Recommendation:
- Buy spare parts at Electrotodo , emphasizing the quality and reliability of the products.


Please note that specific details may vary depending on the exact model of the ironing center and the nature of the problem encountered.
The repair process begins with the disassembly of the device, a task that Pepe approaches meticulously. He explains each step, from removing the water tank to opening the iron to access the internal components. During this process, key elements such as the boiler , the solenoid valve and the pressure switch are highlighted, providing a detailed view of the anatomy of the ironing center.

As part of his conclusions, Pepe recommends purchasing spare parts from Electrotodo.

If your Polti ironing centre is broken, in this video you can find a comprehensive and detailed guide on the repair process, from identifying potential problems to cleaning and assembling the solenoid valve, all backed by Pepe's characteristic experience and humour .

More content

See all